ISONIC EXPERT FFC
ISONIC EXPERT FFC
ISONIC EXPERT FFC
ISONIC EXPERT FFC
ISONIC EXPERT FFC
ISONIC EXPERT FFC
ISONIC EXPERT FFC
ISONIC EXPERT FFC
ISONIC EXPERT FFC
ISONIC EXPERT FFC
ISONIC EXPERT FFC
ISONIC EXPERT FFC
ISONIC EXPERT FFC
ISONIC EXPERT FFC
ISONIC EXPERT FFC
ISONIC EXPERT FFC
ISONIC EXPERT FFC
ISONIC EXPERT FFC
ISONIC EXPERT FFC
ISONIC EXPERT FFC
ISONIC EXPERT FFC
ISONIC EXPERT FFC
ISONIC EXPERT FFC
ISONIC EXPERT FFC
ISONIC EXPERT FFC
ISONIC EXPERT FFC

ISONIC EXPERT FFC

Lieferzeit: 3 - 4 Wochen
Preis auf Anfrage
Lieferzeit: 3 - 4 Wochen

Die ISONIC EXPERT FFC Software erlaubt die Prüfung von Flanschen auf Korrosion unter Anwendung der TTGI Technik. Hierbei kann wahlweise eine Prüfung vom Flansch oder vom Kegel aus erfolgen. 

Diese Inspektionssoftware ist für ISONIC 3510ISONIC 2010 und ISONIC 2009 verfügbar.

Weiterhin bietet die Software folgende Funktionalität:

  • Built-In Flange Geometry Editor and Ray Tracer - Scanning Pattern (Scan Plan) Design
  • Intuitive Image Guided PA Pulser Receiver with Beam Forming View
  • True-To-Geometry Flange Overlay Volume Corrected Imaging - Cross Sectional and Top (C-Scan)- / Side- / End- View and 3D through Sector-Scan Cross Sectional Coverage and line scanning around the flange either encoded or time based
  • DAC / TCG Data / Image Normalization
  • Independent on TCG Angle Gain Compensation / Gain Per Focal Law Correction
  • Automatic Coupling Monitor
  • 100% Raw Data Capturing
  • Automatic Defects Alarming Upon C-Scan Acquisition Completed
  • Automatic Creation of Editable Defects List
  • Comprehensive Postrpocessing Toolkit Including:
    • Recovery and Evaluation of the Captured A-Scans from the Recorded Cross Sectional Views (Sector Scan) and C-Scans
    • Recovery of the Cross Sectional Views from the Recorded C-Scans
    • Converting Recorded C-Scans or their Segments into 3D Images
    • Off-Line Gain Manipulation
    • Off-Line DAC Normalization of the Recorded Images / DAC Evaluation
    • Numerous Filtering / Reject Options ( by Geometry / Position / By Amplitude db-toDAC / etc ) and Regeneration of the Corresponding of Editable Defects List and Storing it into a Separate FIle
    • Defects Sizing
    • Automatic creating of inspection reports - hard copy / PDF File
0 Artikel

NEWSLETTER ABONNIEREN

Produkt zur Wunschliste hinzugefügt