• On sale!
utPod
utPod
utPod
utPod
utPod
utPod
utPod
utPod
utPod
utPod
utPod
utPod
utPod
utPod
utPod
utPod
utPod
utPod
utPod
utPod

utPod

Delivery time: 3-4 weeks
€5,100.00

Ultra-Portable Ultrasonic Flaw Detector and Thickness / Corrosion Gauge

Request Information |  EU VAT Rules | Delivery costs

Miniature dimensions and lightest weight ever

ISONIC utPod delivers full functionality of the top performance ultrasonic detector such as

  • Bi-polar square wave pulser with tunable shape, pulse duration and amplitude (up to 300 V pp) and boosted leading / falling edges enhancing ultrasound penetration for various materials characterized either by high or low grain, sound attenuation, and the like
  • 100 dB analogue gain / 0.2...25 MHz bandpass / 100 MHz sampling rate
  • 32-Taps FIR band pass digital filter with controllable lower and upper frequency limits
  • Analogue performance A-Scan with no range limit for RF display mode
  • Up to 2 kHz pulse repetition frequency
  • Multi-curve DAC, DGS / TCG
  • 2 independent gates
  • Automatic evaluation including trigonometric functions, thickness and curvature correction, etc
  • AWS / API defect evaluation
  • High Color Resolution QVGA screen – 3.2” Active Matrix LCD with an embedded PICASO-GFX2 graphics controller
  • Built-in horn and virtual lamps on the screen to alarm the defect indications
  • 2 on-board rechargeable long durability Li-Ion batteries

ISONIC utPod LF is a modified version of ISONIC utPod adapted for low frequency ultrasound applications. It is characterized by the receiver frequency range and limit for manipulating the duration of initial pulse different from ISONIC utPod – refer to Technical Data in the brochure

0 Item

Technical Data

Operating Modes: Flaw Detector
All-Functional A-Scan Thickness Gauge
Simple Corrosion Gauge
Initial Pulse Type: Bipolar Square Wave Pulse
Initial Transition: <=5 ns (10-90%)
Pulse Amplitude: Smoothly tunable (12 levels) 60V ... 300 Vpp into 50 Ohms
Pulse Duration: 50...600 ns for each half wave synchronously controllable in 10 ns step
Modes: Single / Dual
PRF: 15...2000 Hz controllable in 1 Hz resolution
Gain: 0...100 dB controllable in 0.5 dB resolution
Advanced Low Noise Design: 81 uV peak to peak input referred to 80 dB gain / 25 MHz bandwidth
Frequency Band: 0.2 ... 25 MHz Wide Band
Digital Filter: 32-Taps FIR band pass with controllable lower and upper frequency limits
Ultrasound Velocity: 300...20000 m/s (11.81...787.4 "/ms) controllable in 1 m/s (0.1 "/ms) resolution
Range: 0.5...7000 us controllable in 0.01 us resolution
Display Delay: 0...3200 us controllable in 0.01 us resolution
Probe Angle: 0...90° controllable in 1° resolution
Probe Delay: 0 to 70 us controllable in 0.01 us resolution - expandable
Display Modes: RF, Rectified (Full Wave / Negative or Positive Half Wave)
Reject: 0...99% of screen height controllable in 1% resolution
DAC / TCG: Theoretical — through keying in dB/mm (dB/") factor as used for AWS evaluation, inspection of highly attenuative materials, and the like
Experimental — through recording echo amplitudes from variously distanced equal reflectors, up to 40 points
46 dB Dynamic Range, Slope <=120 dB/us
Available for Rectified and RF Display
DGS: Standard Library for 18 probes / expandable
Gates: 2 Independent Gates
Gate Start and Width: Controllable over whole range of A-Scan time base settings in 0.1 mm / 0.001" resolution
Gate Threshold: 5...95% of A-Scan height controllable in 1% resolution
Signal Evaluation — Digital Readout: 19 automatic functions / expandable; curved surface / thickness / skip correction for angle beam probes; material velocity and probe delay auto-calibration for all types of probes; AWS / API evaluation
Freeze: Freeze All / Freeze Peak
Data Storage Capacity: At least 100000 sets including calibration dumps accompanied with A-Scans
Output: USB — calibration and data files transfer to / from PC, generation of inspection reports in editable format and hard copy / full control by PC
Internal Flash Memory: 2 Gigabytes
Data Logger: 1D (linear), 2D (X, Y), 3D (X, Y, Z), or 4D (X, Y, Z, retake) array
Screen: 3.2" High Color Resolution QVGA Sun-Readable Active Matrix LCD with an embedded PICASO-GFX2 graphics controller
Controls: Touch Screen
Screen: On-board Li-Ion Rechargeable Battery, 6-10 hours continuous operation depending on mode of use
Mains - External AC/DC converter / charger 100-240 VAC, 40-70 Hz, auto-switch
Housing: IP 67 rugged plastic case
Dimensions: 130x84x42 mm (5.12"x3.31"x1.65")
Weight: 400 g (0.88 lbs) - with battery
Hardware Warranty: 12 months
Firmware Warranty: Lifetime free update with the latest version available for free access atSonotron NDT Support Web Page
ISONIC utPod for PC
Software Warranty
Lifetime free update with the latest version available for free access atSonotron NDT Support Web Page
Available in 3 colors: Blue, Red, Black

Corrosion Thickness Gauging —Calibration  

Precision Thickness Gauging —Calibration  

2 point calibration angle beam  

2 point calibration straight beam  

DAC curve demonstration  

AVG curve demonstration  

You might also like

Customers who bought this product also bought:

NEWSLETTER ABONNIEREN

Product added to wishlist