DrawWire encoder
DrawWire encoder
DrawWire encoder
DrawWire encoder
DrawWire encoder
DrawWire encoder
DrawWire encoder
DrawWire encoder
DrawWire encoder
DrawWire encoder

DrawWire C-Scan System

for use with ISONIC PA instrument only
€5,400.00
Delivery time: 3 - 4 days

DrawWire encoder C-Scan System is a lightweight, portable corrosion mapping system based on two wire encoders. DrawWire encoder C-Scan system may be used in conjunction with phased array or T/R probes.

Request Information |  EU VAT Rules | Delivery costs

DrawWire encoder C-Scan Corrosion System consists of two wire encoders, fixed with magnets next to the inspection area and connected to a probe or probe holder and electronics built into one of the encoder boxes. 

The positioning information from both the encoders is passed to the electronics which converts the polar data into X-Y positioning data suitable for the ultrasonic instrument.

The mechanical/electronic calibration is simple and easy to perform in less than a minute following 5 simple steps.

In the standard version of the DrawWire encoder system the maximum area for C-Scanning is 850 mm x 850 mm.

One major feature of the DrawWire encoder C-Scan System is the possibility of re-scanning areas of interest.

DrawWire encoder C-Scan System connects to the PC, where the application software is running, through the USB port and also takes its power from the same USB connection. 

Main Features

  • Low Cost
  • Fast installation
  • Fast calibration in only 5 steps
  • No external power required.
  • Easy to transport, easy to use
  • Rugged

 

Specification

  • High inspection resolution
  • Inspection area size: 850 x 850 mm (optional larger area)
  • Inspection Speed: Up to 200 mm/s in any direction (depending on inspection job)
  • Mounting distance:  0.3 to 1.2 m
  • Inspection Orientation:In any direction, user defined during calibration
  • Magnetic mounting

Standard package (suitable for PA C-Scanning)

  • 1 x magnetic wire encoders
  • 1 x magnetics wire encoder with built-in electronics
  • 1 x encoder cable
  • 1 x USB cable
  • 1 x transport case
 

Required for operation 

  • suitable ultrasonic instrument (e.g. ISONIC 2010,  ISONIC 2009 , ISONIC 3510)
  • C-Scan software (e.g. XY Scan Panelscan)
  • PC/Notebook 
  • Linear Phased Array Probe with delay line
 

Accessories

  • Automatic couplant system
1 Item

Standard package (suitable for PA C-Scanning)

  • 1 x magnetic drawwire encoder
  • 1 x magentic drawwire encoder with integrated electronics
  • 1 x encoder cable
  • 1 x USB cable
  • 1 x transport case

You might also like

NEWSLETTER ABONNIEREN

Product added to wishlist