MAPASYC - Manual PA C-Scan System for flat surface and pipes
Portable C-Scan System for Phased Array inspection
(e.g. corrosion mapping)
For flat materials and pipes!
Used (Demo) Scanner!
MAPASYC is a lightweight portable X,Y scanning system consisting of an combination of a wagon type magnetic wheel encoder and a DrawWire encoder for connection to ISONIC instruments.
MAPASYC uses two wagons, each equipped with 4 magnetic wheels for easy positioning and guiding. The PA probe is fixed in a universal, spring loaded probe holder and is manually moved around the pipe. The positioning data is taken by the encoder mounted inside one of the guiding wagons. After one turn, the probe holder is moved further for a defined distance (distance is depending on the probe used) and the positioning data is now taken by the DrawWire encoder mounted on top of the scanner. At the end a complete scan (corrosion map with all raw data) is stored in the UT system
MAPASYC C-Scan System may be used in conjunction with phased array instruments such as ISONIC 2009, ISONIC 2010 or ISONIC 3510
Features
- Fast installation.
- No external power required.
- Easy to transport, easy to use
- Rugged.
Specification
- High inspection resolution
- Inspection on almost any pipe diameter
- Adjustable spring loaded and universal probe holder
- Magnetic mounting
Standard Kit
- 2 x wagon with magnetic wheels and built-in encoder
- 1x DrawWire encoder
- 1x Guiding profiled rod with spring loaded probe holder
- 2 x encoder cable
- 1 x transport case
Required for operation
- suitable ultrasonic instrument (e.g. ISONIC 2010, ISONIC 2009 or ISONIC 3510); others on request
- C-Scan software (XY Panel scan)
- PC/Notebook
- Linear Phased Array Probe with delay line
Accessories
- Automatic coupling supply system
Standard Kit
- 2 x wagon with magnetic wheels and built-in encoder
- 1x DrawWire encoder
- 1x Guiding profiled rod with spring loaded probe holder
- 2 x encoder cable
- 1 x transport case
You might also like
NEWSLETTER ABONNIEREN